How to Use a Flipper Feed Aquarium Feeding Kit

By Premium Pet Supplies for Dogs & Cats - PetAmzStore | Published: 2026-10-27

Category: How-to Guides

Learn how to attach and use the Flipper Feed Aquarium Feeding Kit with your Flipper Cleaner to deliver slow-release food anywhere in your tank—without overfeeding or clogging your filter.

Quick Answer

Attach the Flipper Feed kit to your Flipper Cleaner, fill the sealed feeding tube with food, and submerge it to release food slowly—this keeps food in the water column instead of the filter.

Why Use a Feeding Tube Instead of Just Dropping Food

Most fish foods float or sink quickly, and uneaten bits end up in the filter or on the substrate. The Flipper Feed kit uses a sealed feeding tube that creates an air/fluid level below the water surface, so food is released gradually. This gives your fish more time to eat and reduces waste that can spike ammonia.

Because the kit attaches to any Flipper Cleaner (Nano, Standard, MAX, or Flipper Float), you can position the feeder anywhere in the aquarium—not just at the surface. That's especially handy for bottom feeders or shy fish that won't come up to eat.

Step-by-Step: Using Your Flipper Feed Kit

Attach the feeding tube to your Flipper Cleaner: Slide the sealed feeding tube onto the body of your Flipper Cleaner until it clicks or fits snugly. Ensure it's secure so it won't detach when you move the cleaner in the water. Check that the tube is firmly attached before adding food—if it's loose, it may fall off and spill food.
Fill the tube with food: Remove the tube from the cleaner or open the top (depending on your model) and add your fish food. Don't overfill—leave a little space so water can enter and create the slow-release effect. Use a small amount first to see how quickly your fish eat; you can adjust the portion next time.
Submerge the feeder in your aquarium: Place the Flipper Cleaner with the attached feeder into the water. The sealed tube will trap air, creating an air/fluid level below the surface. This lets food escape slowly rather than all at once. Watch the release rate—if food spills too quickly, you may have overfilled or the seal may not be seated correctly.
Position the feeder where your fish need it: Use the Flipper Cleaner's handle to guide the feeder to a specific spot—near the bottom for bottom feeders, or in a calm area for shy fish. The kit works anywhere in the tank. Move the feeder slowly to avoid startling fish or creating a current that scatters food.
Remove and rinse after feeding: After your fish have eaten, take the feeder out and rinse it with aquarium water (not soap). Let it dry before storing. This prevents food residue from spoiling and clogging the tube. Regular rinsing keeps the tube clear and prevents bacterial growth—add it to your routine aquarium maintenance.

What You Need to Know About the Flipper Feed Kit

Flipper Feed Aquarium Feeding Kit for Flipper Cleaners: The Flipper Feeding Kit turns any Flipper Cleaner into a versatile feeding station and is compatible with all Flipper Aquarium Cleaners Nano, Standard, & MAX including Flipper Float. You don't need a separate feeder—if you already own a Flipper Cleaner, this kit adds a feeding function without taking up extra tank space.
Flipper Feed Aquarium Feeding Kit for Flipper Cleaners